Sorry, you need to enable JavaScript to visit this website.

Skip to content Skip to navigation

Using Reversible Metal Electrodeposition to Make Beautiful Windows with Adjustable Tinting to Save Energy

Date and Time: 
September 25, 2017 -
4:30pm to 5:20pm
Admission: 

Free and open to all.

Location: 
NVIDIA Auditorium, Jen-Hsun Huang Engineering Center
Contact Email: 
energyseminar@stanford.edu
Contact Phone: 
650-724-9619
Event Sponsor: 
Precourt Institute for Energy

Seminar Speaker: Mike McGehee

Electrochromic materials are highly desirable because their tinting can be adjusted by a switch or automated control to allow the ideal amount of light to pass through a window, a skyroof or eyeglasses. A key advantage of attenuating light with electrochromics is that the view is not distorted as it is when a curtain or blinds are used. Studies have shown that the heating and cooling costs of buildings can be reduced by 20% simply by using electrochromic materials to control the radiative transfer of heat into and out of the buildings. Several companies are trying to commercialize electrochromic windows, but the technology has not yet become ubiquitous because most of the windows have a bluish tint, switch slowly over approximately 20 minutes, and are slightly too expensive. We have developed a completely different approach to dynamically controlling the tinting of windows that is based on a transparent electrode similar to those used in flat-panel displays and a polymer gel containing metal ions. When a voltage is applied to the electrode, a thin film of metal that is capable of absorbing light forms. When the opposite voltage is applied, the metal is stripped away and the transparency of the window is restored. These windows are color neutral and can be switched on and off more than 5000 times without degradation. They are simpler than electrochromics and have the potential to be cost-effective when scaled up.

Suggested Reading:

“Dynamic Windows with Neutral Color, High Contrast, and Excellent Durability using Reversible Metal Electrodeposition,” C. J. Barile, D. J. Slotcavage, J. Hou, M. T. Strand, T. S. Hernandez, and M. D. McGehee, Joule 1 (2017) 1.

Speaker Biography:

Mike McGehee is a Professor in the Materials Science and Engineering Department and a Senior Fellow of the Precourt Institute for Energy. His research interests are developing new materials for smart windows and solar cells. He has taught courses on nanotechnology, nanocharacterization, organic semiconductors, polymer science and solar cells. He received his undergraduate degree in physics from Princeton University and his PhD degree in Materials

Science from the University of California at Santa Barbara, where he did research on polymer lasers in the lab of Nobel Laureate Alan Heeger. He won the 2007 Materials Research Society Outstanding Young Investigator Award.